Parex 100 Newton Grout AW
Parex 100 Newton Grout AW is an ultra high strength grout specially formulated using a Portland cement powder mix. The mix design consists of a blend of fine and ultra-fine cements, high quality graded sands and a set of synergistic admixtures. The mix design includes special shrinkage compensating components, which give a non-shrink grout in both the plastic and hardened states. Powerful plasticising agents produce a highly flowing grout at low water content. The product exhibits highly anti-washout properties and is ideal for underwater applications.
The product is supplied either pre-packaged ready for onsite mixing or loose bulk quantities and only requires measured water addition. The material readily mixes with water to produce the ultra high strength grout that is easily placed to give exceptional structural support and vibration resistance.
Parex 100 Newton Grout AW may be safely used in contact with reinforcing steel and structural steel elements due to its very low chloride content. The specialised mix design enables placement at low water content leading to good freeze-thaw stability, low water absorption plus resistance to oil, sea water and mild alkali attack.
Placement thickness may be in the nominal range of 10mm to 100mm. 100 Newton Grout AW is suitable for pumping applications, pumping trials are recommended prior to site application to ensure pumping equipment is suitable, alternatively consult our Technical Services Department for guidance on suitable plant.
- Ultra high strength grout and support systems for: Crane rail tracks. Stanchion bases. Vibrating machinery bed plates.
- Ground anchors.
- Bridge bearing seats.
- Off shore structures repairs.
- Wind turbines bases.
- Underwater grouting projects.
Grouting shall be carried out using 100 Newton Grout AW as manufactured by Parex Ltd. The product must be stored, handled and placed in accordance with the manufacturer’s instructions.
Parex Limited has an integrated business management system. This is externally accredited by UK CARES to BS EN ISO 9001:2015, BS EN ISO 14001:2015, BS ISO 45001:2018 and BES 6001.
100 Newton Grout AW has been tested in accordance with the appropriate parts of the following standards:
- EN 12390, EN 196, EN 1015
- Corps of Engineers Specification for Non Shrink Grout CRD C621
For more information on Parex 100 Newton Grout AW click here