SikaBond 52 Wood Floor Adhesive 600ml

SikaBond 52 Wood Floor Adhesive

Uses

For Full Surface bonding:

• Solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards, plywood and OSB can be bonded

Full Surface Bonding with SikaBond® Dispenser-1800 / -5400:

• Solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet as well as chip boards can all be bonded. For detailed application instructions refer to the Method statement of the SikaBond® Dispensers series, or contact our Technical Department

For the Sika® AcouBond®-System:

• Solid wood boards (tongued and grooved), 3-ply engineered wood as well as chip boards plywood and herringbone blocks can all be bonded For detailed application instructions refer to the Product Data Sheet of the Sika® AcouBond®-System, or contact our Technical Department

For Beaded Application:

• Solid wood boards, 3-ply engineered wood as well as chip boards can be bonded

Characteristics / Advantages

• 1-component, ready to use
• Fast curing properties
• Floor can be sanded after 12 hours (full surface bonding, +23°C / 50% r. h., up to 1 mm adhesive thickness)
• Excellent workability, very easy to extrude
• Good initial tack
• Elastic, footfall sound-dampening adhesive
• Suitable for most common types of wood floors
• Especially suitable for problematic woods including beech, maple and bamboo
• Suitable for bonding wood floors directly onto old ceramic tiles
• Reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate
• Suitable for use with sub floor heating
• Compensates for some substrate unevenness
• Adhesive can be sanded
• Solvent free
• Odourless

Approvals / Standards

EMICODE EC 1PLUSR, very low emission

Curing Rate

The floor may be walked on / sanded 12 hours to 24 hours after installation ( +23°C / 50% r. h. up to 1 mm adhesive thickness dependent on climatic conditions and adhesive layer thickness).

Skin Time / Laying Time

~ 60 minutes (+23°C / 50% r. h.)

Substrate Moisture Content

Permissible substrate moisture content:

• 2.5% CM for cement screed (ca. 4% Tramex / Gravimetric weight percent).
• 0.5% CM for anhydrite screed. 3 – 12% CM for magnesite flooring (dependent on proportion of organic components).

Permissible substrate moisture content for use with underfloor heating:

• 1.8% CM for cement screed (ca. 3% Tramex / Gravimetric weight >percent).
• 0.3% CM for anhydrite screed.
• 3 – 12% CM for magnesite flooring (dependent on the proportion of organic components).
• For moisture contents and the quality of substrates the guidelines of the wood floor manufacturer as well as standard construction rules must be observed.