Parex Epoxy Thixotropic Injection Grout
Epoxy Thixotropic Injection Grout is a thixotropic two part epoxy resin system. The base resin component is thixotropic plus a low viscosity liquid hardener. Epoxy Thixotropic Injection Grout may be placed using a Tecgrip Gun and Tecgrip Cartridge or may be injected using a suitable hand or mechanical pump.
Grouting of gap dimensions 0.1mm to 10mm may be achieved without the use of grout tight shuttering. The two part system gives rapid strength gain obtaining mechanical properties several times those of high quality concrete. The product is non shrink enabling complete fill of the grouting area.
The hardened grout is resistant to most chemicals, stable to sea water, petroleum products and resists freeze thaw cycles.
Uses include:
Filling and bonding of cracked concrete where grout leakage may occur. Structural support where thin section grouting is required without the use of shuttering.
Standards
Epoxy Thixotropic Injection Grout has been tested in accordance with the relevant parts of:
BS 6319
Specification Outline
Grouting and filling shall be carried out using Epoxy Thixotropic Injection Grout as manufactured by Parex Ltd.
The product shall be stored, handled and used strictly in accordance with the manufacturer’s instructions.
For more information on Parex Epoxy Thixotropic Injection Grout click here
To view our full Parex product range click here
