Parex Tecgrip S
Parex Tecgrip S is a cementitious anchor grout requiring only the addition of clean water. The product is based on a Portland cement mix with high quality graded silica sands plus a synergistic blend of admixtures.
The mixed grout is pumped into place using a Pumpable mortar cartridge gun. Each filling of the gun must be used within 5 minutes to avoid thickening. The product in the mixing vessel must be mixed each time a gun filling is carried out. The injected grout will tighten in the anchor hole and fix the bolt, tie or other unit into the substrate.
Tecgrip S is suitable for fixings into most construction materials including concrete, rock, brickwork, masonry blockwork or other substrates capable of carrying the design load.
- Ties into brick arches.
- Overhead rail tracks.
- Starter bars and dowels.
- Brick ties and stitching.
- Single component, just add water.
- Conforms to EN 998-2.
- Consistency: thixotropic mortar.
- Minimum annular clearance 2mm.
- Hand or mechanical pump placed.
- Suitable for vertical application.
For more information on Parex Tecgrip S click here