Free next working day delivery if ordered by 2pm
Sika AnchorFix-1 300ml
Sika AnchorFix-1 is a single cartridge, two component, mix-in-the-nozzle, fast curing, solvent and styrene free, methacrylate based chemical anchoring adhesive for standard applications with low to medium loads.
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
- Concrete
- Hollow and solid masonry
- Hard natural stone*Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.
Advantages
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- ETA Approval available
- Non-sag, even overhead
- Styrene-free
- Low odour
- Low wastage
