PRODUCT INFORMATION
Product Code: SKCLN205L
Sika Aktivator with it’s alcohol solution, contains a bond activating substance designed for the activation of surfaces prior to bonding and sealing with Sikaflex products.
Sika Aktivator-205 is used to activate the following non-porous substrates:
metals, plastics, glazed ceramics, painted surfaces.
This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Areas of Application
Sika Aktivator-205 is used to activate the following non-porous substrates: metals, plastics, enamelled glass (ceramics), painted surfaces.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions, especially boundary temperature conditions have to be performed to ensure
adhesion and material compatibility.
Method of Application
Wipe bond faces with a clean lint free paper towel moistened with Sika Aktivator-205. Change paper towel after each wipe. If pretreated area is not bonded after 2 hours the activation process has to be repeated (max. 2 times).
Ideal application and surface temperature is between 15°C and 25°C (60 – 75°F).
Consumption depends on the specific nature of the substrates and manufacturing process.
Tightly re-seal container immediately after each use.
Prolonged exposure to atmospheric moisture will cause Sika Aktivator-205 to become opaque/cloudy and therefore inactive. Discard any product in this condition. Flash-off times may
vary depending on climatic conditions.
