Parex Fine Bedding Concrete FBC

1-component cementitous bedding mortar for paving units






Our price

£19.95 £23.94 inc VAT


£24.36 £29.23 inc VAT

Cursor Dark
CLICK AND COLLECT Available on this product
SAVE ON BULK ORDERS Call 01708 855 698 for a quote
bank logos

Parex Fine Bedding Concrete (FBC)


  • Compliant to BS 7533-7:2010
  • Cost effective
  • Available in bulk silos or bags



Parex Fine Bedding Concrete (FBC) is a permeable Portland cement-based powder mix which is polymer reinforced. The mix design includes special powerful plasticising agents which produce a workable mortar suitable for bedding paving units. The low water requirement enables the placed mortar to rapidly develop the compressive strength required to support the placed paving elements.

Supplied ready mixed either in: silos, bulk bags or 25kg bags, Parex Fine Bedding Concrete is an integral member of the Parex range of Streetscape Mortars, and is designed specifically to conform to BS 7533-7:2010. It should be used in conjunction with: Parex Granatech or Parex SettPoint, to provide a fully compliant bedding and jointing system for hard landscaping products.

The pre-blended product is ready for on site mixing and only requires the measured addition of water.

The resulting mixes have good freeze-thaw stability and are resistant to oil and many chemical environments. Placement thickness may be in the nominal range 40mm to 75mm in a single layer.


  • Bedding of paving units for vehicular traffic
  • Bedding of paving units for pedestrian traffic

Note: The bond strength attained is a function of the mortar used and the porosity/surface texture of the paving unit. When bedding paving units, the inclusion of a priming/bond coat of Parex Bond Plus Mortar is essential for vehicular trafficked areas.


Specification Outline

Bedding of paving units shall be carried out using Parex Fine Bedding Concrete. The product must be stored, handled and used strictly in accordance with the manufacturer’s instructions.


Quality Assurance

Parex has an integrated management system. This is externally accredited to: BS EN ISO 9001, BS EN ISO 14001 and BS ISO 45001.
Colour variation between deliveries may occur due to the variation in the raw materials used. The physical characteristics and consistency remain unaffected.


Parex Fine Bedding Concrete has been tested in accordance with the relevant Parts of the following standards: BS 7533-7:2010, BS 1881 and BS EN 12697-19.


For more information on Parex Fine Bedding Concrete click here





Delivery Information

All deliveries are for the Next Working Day, unless otherwise stated. Click here for more delivery information.