Product Description
Parex Monrex GF
A one-coat, breathable, weather resistant and breathable decorating render for masonry and concrete walls. Available in 48 standard colours (special colours to order), the render provides an excellent finish and good surface hardening. Parex Monorex GF is suitable for machine spraying or hand application and can be finished in a range of styles from smooth sponged or float fine down finish, fine scraped, light tyrolean to heavy roughcast textured finishes. Parex Monorex GF is suitable for rendering onto a range of masonry substrates; Please note: Blocks with a close texture, generally classed as paint grade blocks, should not be rendered without an application of the substrate porosity regulator MICRO GOBETIS 3000.Suitable for
- Ultra-lightweight, lightweight & dense aggregate concrete blocks(1). n Bricks.
- Clay blocks e.g. Porotherm(1)
- Standard low and normal density lightweight aircrete concrete blocks.
- Breeze blocks (clinker).
- Stone/rubble stone.
- Shuttered concrete(1).
- Expanded clay insulation blocks(1).
- Clean, sound, well adhered existing render. n Base coats conforming to BS EN 13914-1 n PAREX grey weather resistant base coats, e.g. MONOGRIS E, PARMUREX or TRADIREX.
- Dry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocks. Consult manufacturer’s data sheets. Durisol with Monorex GM is NHBC approved for single skin external wall construction.
- For below dpc applications and old substrates in accordance with BS8000 - 4 Code of Practice for Waterproofing, consult Parex. (1) These substrates will require a suction control coat of MICRO GOBETIS 3000.
Unsuitable for
- Weak mortar or plaster (Gypsum) coated constructions.
- Exposed vertical substrates with a backward incline above 10° - a backward incline may affect water run off and may have a tendency to hold moisture.
- Painted substrates - Unless treated with PARINTER. Contact Parex.
Finishes
- Fine Scraped
- Sponge or Float Smoothed*
- Trowel Smoothed*
- Spray Textured - from tyrolean style to heavy roughcast effect.
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.






