Uses include:
- Re-bedding of raised manhole frames
- Bedding of frames in new roads
- Support of road furniture
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Parex Highway CA45 FAQs
What is Parex Highway CA45?
Parex Highway CA45 is a pre-mixed, 1-part, cementitious, non-shrink, rapid setting bedding and repair mortar
How do I prepare the surface before applying Parex Highway CA45?
Laitance and all loose material including dust, oil and grease should be removed in order to produce a sound substrate. The work area should be pre-wetted (ideally saturated surface dry), taking care to remove any standing water before placing the mortar.
How do I mix Parex Highway CA45?
To achieve the most consistent mortar mix, mechanical mixing is recommended. Thorough hand mixing is suitable, but care should be taken to ensure that the
mix is fully wetted out without the use of excess water.
Mechanical mixing may be carried out in a suitable vessel using a slow speed high torque drill and paddle. Hand mixing may be carried out using a clean spot board or wheelbarrow.
25 kg of Parex Highway CA45 requires 2.5 to 3.0 litres of water to give a stiff mortar. Excess water should not be added.
Once setting has commenced, further mixing should not be used to rework the mix. The mortar should be placed within approximately 10 minutes of mixing. The working time may be extended in cold ambient conditions, and may be slightly shortened in hot ambient conditions.






