Parex Fine Bedding Concrete FBC
Product code: 615341
- Pre-batched for simplicity:Â only requires the measured addition of water.
- Cost-effective.
- Ready for on-site mixing.
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Parex Fine Bedding Concrete FAQs
What is Parex Fine Bedding Concrete?
Parex Fine Bedding Concrete is a hard landscaping, fine bedding mortar for the laying of natural stone slabs, pavers and setts
How do I prepare the surface before applying Parex Fine Bedding Concrete?
Contact surfaces must be sound, clean and provide a good mechanical key. Remove any loose material, laitance, plaster, paint and oily deposits.
Prepare a priming scrub coat of Parex Bond Plus Mortar. Prime the prepared substrate and the underside of the paving units with the priming scrub coat using a stiff bristle brush. Apply the Parex Fine Bedding Concrete (FBC) before the priming coat has dried (i.e. ‘wet-on-wet’).
How do I mix Parex Fine Bedding Concrete?
Mixing of bagged Parex Fine Bedding Concrete requires a forced action mixer such as a Creteangle or Rojo. Pour the recommended amount of clean water into a suitable mixing vessel. Gradually add the powder and mix thoroughly until a homogeneous product is achieved. Once mixed, apply within the pot life. Additional water should not be added to
‘revive’ the product past its pot life.






