Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
Parex Bond Plus Mortar 20kg
Product code: 629531
- Single-component.
- Ready to use with the addition of water.
- Good freeze-thaw stability.
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Parex Fixopierre
Parex Paraguard
Parex Monorex GM 25kg
40 units per box
Parex Monorex GF
Parex Bond Plus Mortar FAQs
What is Parex Bond Plus Mortar?
Parex Bond Plus Mortar is one-part primer and bonding Adhesive for laying all sizes of paving units.
How do I mix Parex Bond Plus Mortar?
Pour the required quantity of clean water in to a suitable, clean mixing vessel. Slowly add the Parex Bond Plus Mortar whilst continuously mixing, using a slow speed, high torque drill and mortar stirrer. Continuously mix until a uniform mix is achieve, approximately 2 minutes.
How do I apply Parex Bond Plus Mortar?
Prime the prepared substrate and the underside of the paving units with the Bond Plus Mortar using a brush or trowel so the total applied thickness is 1-2mm.
Placing of Parex Fine Bedding Concrete and Paving
Apply the mixed Parex Fine Bedding Concrete (FBC) to the primed substrate before the priming coat has dried. Compact the FBC to ensure good contact with the underlying primed surface. Prime the back of the paving units being used with Parex Bond Plus Mortar.
Place the units onto the wet FBC and adjust the levels as required. Lay the paving unit onto the FBC immediately after priming, tapping it firmly to ensure the underlying FBC is fully compacted.
Application thickness of the FBC should be in the range of 30mm to 75mm. In situations where thick layers are required to be built up, the surface of the under layer should be left with a wood float finish and should be scored. Subsequent Parex Bond Plus Mortar and FBC layers may be applied as soon as the initial layer is firm enough not to distort under the new work. Parex Bond Plus Mortar may be applied at temperatures between +5°C (on a rising thermometer) and +35°C.