Top brands
We only distribute the best
Free next working day delivery
on selected stock items
Bulk order discounts
Call 01708 855698
SikaGrout 3320 25kg
Product code: 726211
SikaGrout 3320 is a one-part, ultra-high strength, fatigue-certified, cementitious grout, specially designed for onshore steel and precast concrete wind towers. It contains recycled materials and can therefore contribute to reducing...
More information
Product Description
- Ready to use, just add water.
- Wide application thickness of 20 mm to 500 mm.
- Rapid early-strength development, even at low temperatures.
- Ultra-high final compressive strength: >110 MPa.
- Very low shrinkage.
- Fatigue-certified.
- Good flowability.
- Very good adhesion to concrete.
- Suitable for pumping long distances.
- Ultra-high performance precision grouting of joints.
- Filling horizontal joints between tower base and foundation.
- Filling horizontal joints between precast concrete elements.
- Applications requiring fatigue resistance.
- Deep section grouting requirements.
Product code: 726211
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Sika MaxMix Cement Colours 1l
SikaGrout 3320 FAQs
What is SikaGrout 3320?
SikaGrout 3320 is a 1-part one-part, ultra-high strength, fatigue-certified, cementitious grout, specially designed for onshore steel and precast concrete wind towers.
What is the yield of SikaGrout 3320?
Per 25 kg bag of SikaGrout 3320 yields 11.1L
How do I prepare the surface before using SikaGrout 3320?
Concrete: Prepare the concrete surface by providing a mechanical key and by removing any contamination that may impede the grout flow or reduce adhesion strength.
- Use suitable preparation equipment to remove laitance, delaminated, weak, damaged and deteriorated concrete.
- Clean any pockets or holes for structural fixings from all debris and water.
The substrate shall be structurally sound, thoroughly clean, and have a textured finish exposing the aggregate.
Steel: Prepare the steel to remove any contamination which will impair the grout flow or reduce adhesion strength.
- Clean the substrate using grinding, abrading or shot blasting equipment.
The substrate shall be thoroughly clean and free from oil, grease, rust and scale.
Shuttering or Formwork: Where formwork is required, ensure that it is of sufficient strength, treated with release agent, and sealed to prevent the leakage of pre-wetting water and grout.
- If vacuum extraction equipment is NOT used to remove pre-soak water, ensure the formwork comprises outlets for the pre-soaked water to drain.
- For manual grout application, construct a header box or hopper on one side of the formwork to maintain a minimum grout head of 150 mm to 200 mm during the grouting process.