Top brands
We only distribute the best
Free next working day delivery
on selected stock items
Bulk order discounts
Call 01708 855698
Parex Tecgrip S 25kg
Product code: 654417
Parex Tecgrip S is a cementitious anchor grout requiring only the addition of clean water. The product is based on a Portland cement mix with high quality graded silica sands...
More information
Product Description
- Ties into brick arches.
- Overhead rail tracks.
- Starter bars and dowels.
- Brick ties and stitching.
- Anchoring.
- Single component, just add water.
- Conforms to EN 998-2.
- Consistency: thixotropic mortar.
- Minimum annular clearance 2mm.
- Hand or mechanical pump placed.
- Suitable for vertical application.
Product code: 654417
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Sika MaxMix Cement Colours 1l
Parex Tecgrip S FAQs
What is Parex Tecgrip S?
Parex Tecgrip S is a cementitious anchoring and stitching grout pumped into place using a Pumpable mortar cartridge gun.
How do I mix Parex Tecgrip S?
Pour 5 litres of clean water into a clean mixing vessel for each complete bag of Parex Tecgrip S. Slowly add the powder to the water whilst continually mixing. Mechanical mixing should be carried out using a high torque slow speed drill with a Grout Stirrer. Mix material for a further 2 minutes after all powder has been added to achieve a homogeneous mix.
How do I apply Parex Tecgrip S?
Load the mixed anchor grout into the cartridge of the injection gun. Use an extension tube for the cartridge to allow filling of the hole from the bottom to the mouth. Immediately after placing the Parex Tecgrip S, insert the bolt, bar, wall tie, slotting or other fixing. Gently agitate the inserted fixing to ensure complete contact by the anchor grout. Once placed do not disturb before the anchor grout has hardened.
Each cartridge filling should be used within 5 minutes. Prior to each cartridge loading, the material in the pail should be re-mixed to maintain grout workability.
For best tensile anchorage results, a minimum embedment depth of 100mm is recommended. Hole diameters may be varied but a minimum of 3mm all-round clearance should be used. This clearance may be increased for ease of placing fixings into deep holes.
Factors controlling uniaxial pull out load:
- Type and strength of substrate.
- Embedment depth.
- Hole preparation.
- Type of fixing.