Top brands
We only distribute the best
Free next working day delivery
on selected stock items
Bulk order discounts
Call 01708 855698
Parex Epoxy Thixotropoic Crack Bonder
Product code: 660381
Parex Epoxy Thixotropoic Crack Bonder
Uses include:
Instructions For Use
Preparation Ensure that crack surfaces are free from dust and oily contamination. Small gaps may be blown out using clean dry compressed air. Steel should be free of rust and flaking mill scale. All work surfaces must be essentially dry. Mixing Pour all of the hardener from the small bottle into the base container that has sufficient volume to act as the mixing vessel. Thoroughly mix the two components until a homogenous thixotropic product is achieved. For gaps up to 10mm add one bag of filler in two portions. For larger diameter voids use both filler bags, adding each one in two portions. In all cases mix until a uniform consistency is obtained. Placing Pierce the metal film inside the Tecgrip Cartridge and insert the mixed ETCB. After cutting off the nozzle the cartridges may be fitted to a Tecgrip Gun and are ready for use. Place the mixed product within the useable time as given in Useable Time data. Equipment should be cleaned with Solvent prior to product hardening. Curing No special curing practice is requiredOrders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Parex Fixopierre
Parex Paraguard
