Top brands
We only distribute the best
Free next working day delivery
on selected stock items
Bulk order discounts
Call 01708 855698
Parex Cable Grout 20kg
Product code: 629538
Click and Collect Available
Enquire about this product:
Product Description
- Grouting of cable ducts, voids and fine fissures.
- Support of cable anchor plates and ground anchors.
- To provide bearing or contact between structural elements.
- Grouting behind shafts and tunnel linings.
- Underpinning, loose floor and road slabs.
Product code: 629538
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Sika MaxMix Cement Colours 1l
Parex Cable Grout FAQs
What is Parex Cable Grout?
Parex Cable Grout CARES approved 1-part cementitious grout for grouting of cables in post-tensioned concrete.
How do I mix Parex Cable Grout?
Measure the appropriate amount of water to achieve the desired grout consistency. For each 20kg bag of Parex Cable Grout, a maximum of 7 litres of water is required. For single bag mixes, suitable mixing may be achieved using a high torque slow speed drill with a grout stirrer. For larger mixes use a standard grout mixer such as the Groutmaster, Putzmeister or Colcrete series. Pour the required quantity of clean water into a clean mixing vessel. Slowly add the Parex Cable Grout to the water whilst continually mixing. Keep the mixed grout in a slow agitating holding tank prior to placing.
How do I apply Parex Cable Grout?
Where Parex Cable Grout will be pumped into place, the grout pump should be of the positive displacement type capable of generating at least 10 bars of pressure. Up to 40 bars may be required to fill particularly long or high upward running ducts. The rate and continuity of placing should be controlled to encourage good penetration of grout into the voids within the duct and the expulsion of air from the duct. Do not disturb once grouting has been completed before the grout has hardened. Parex Cable Grout may be placed at temperatures between +5°C and +35°C.