Top brands
We only distribute the best
Free next working day delivery
on selected stock items
Bulk order discounts
Call 01708 855698
Sikadur-32+ 4.5kg
Product code: 674401
Click and Collect Available
Product Description
- Structural adhesive for bonding: Concrete elements (including bonding fresh to hardened concrete).
- Hard natural stone.
- Ceramics, fibre cement.
- Mortar, bricks, masonry, render.
- Steel, iron, aluminium.
- Wood. Polyester, epoxy, polyurethane (PU) grouts (e.g. Icosit KC Range).
- Polyester / fibreglass and epoxy resin materials. Fixing and anchoring for:
- Small anchors, Fasteners. Railway fasteners.
- Application temperature range +10 °C to +30 °C.
- Suitable for dry and damp concrete substrates.
- Easy to mix and apply.
- Very good adhesion to a range of construction materials.
- Hardens without shrinkage.
- Different coloured components (for mixing control).
- No primer needed.
- High initial and ultimate mechanical strength.
- Impermeable to liquids and water vapour.
- Good chemical resistance.
Product code: 674401
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Black Jack 904 Bitumen Roof Felt Adhesive
Sikaflex EBT+ 3-in-1 Sealant Adhesive and Filler 300ml
Sikadur-32+ FAQs
What is Sikadur-32+?
Sikadur-32+ is 2-part structural epoxy adhesive for bonding, fixing and anchoring/
How do I mix Sikadur-32+?
- Prior to mixing all parts, mix Part A (resin) briefly using a mixing spindle attached to a slow speed electric mixer (maximum 300 rpm).
- Add Part A to Part B (hardener) ensuring all material has been removed and added to Part B.
- Mix Parts A+B continuously for at least 3 minutes until a uniformly coloured, smooth consistency mix has been achieved.
- Do not overmix.
- To ensure thorough mixing pour materials into a clean container and mix again for approximately 1 minute.
- Mixing time for Parts A+B = 4 minutes.
How do I apply Sikadur-32+ for bonding applications?
- On damp prepared concrete substrates, always apply by brush and work the Product well into the substrate.
- Apply the mixed Product to the prepared substrate by brush, roller, spray or trowel ensuring uniform and complete coverage.
- For optimum adhesion, apply the adhesive to both substrates that require bonding.
- For bonding wet fresh concrete to hardened prepared concrete, place the concrete whilst the resin layer is still tacky. Note: If the product becomes glossy and loses tackiness, apply another coat and
proceed to place concrete.
How do I apply Sikadur-32+ for anchoring applications?
- For small anchors or fasteners, clean the hole thoroughly with a special round steel brush and with compressed air (minimum pressure 6 bar), starting from the bottom.
- Once the hole is completely clean and free of any loose particles or dust, pour the Product in the hole, avoiding entrapping air.
- Insert the anchor or fastener with a rotary motion within the adhesive open time. Note: Some of the adhesive must flow out of the hole.
- During the resin hardening time the anchor must not be moved or loaded.